UKCA Designated Standards (LVD)
Total records: 819
Visible: 819
Source: gov.uk Download
| Reference | Standard | Title / Description |
|---|---|---|
| Legislation reference (A) | Reference number of the designated standard (B) | Title of the designated standard (C) |
| S.I. 2016 No. 1101 | EN ISO 11252:2013 | Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) |
| S.I. 2016 No. 1101 | EN 13637:2015 | Building hardware - Electrically controlled exit systems for use on escape routes - Requirements and test methods |
| S.I. 2016 No. 1101 | HD 308 S2:2001 | Identification of cores in cables and flexible cords |
| S.I. 2016 No. 1101 | HD 361 S3:1999 | System for cable designation |
| S.I. 2016 No. 1101 | HD 368 S1:1978 | Direct acting recording electrical measuring instruments and their accessories |
| S.I. 2016 No. 1101 | HD 549 S1:1989 | Conference systems - Electrical and audio requirements |
| S.I. 2016 No. 1101 | HD 597 S1:1992 | Coupling capacitors and capacitor dividers |
| S.I. 2016 No. 1101 | HD 603 S1:1994 | Distribution cables of rated voltage 0,6/1 kV |
| S.I. 2016 No. 1101 | HD 604 S1:1994 | 0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power stations |
| S.I. 2016 No. 1101 | HD 605 S2:2008 | Electric cables - Additional test methods |
| S.I. 2016 No. 1101 | HD 626 S1:1996 | Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV |
| S.I. 2016 No. 1101 | HD 627 S1:1996 | Multicore and multipair cables for installation above and below ground |
| S.I. 2016 No. 1101 | HD 639 S1:2002 | Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) |
| S.I. 2016 No. 1101 | EN 50065-4-2:2001 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-2: Low voltage decoupling filters - Safety requirements |
| S.I. 2016 No. 1101 | EN 50065-4-7:2005 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-7: Portable low voltage decoupling filters - Safety requirements |
| S.I. 2016 No. 1101 | EN 50085-1:2005 | Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 50085-2-1:2006 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings |
| S.I. 2016 No. 1101 | EN 50085-2-2:2008 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements for cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor |
| S.I. 2016 No. 1101 | EN 50085-2-3:2010 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements for slotted cable trunking systems intended for installation in cabinets |
| S.I. 2016 No. 1101 | EN 50085-2-4:2009 | Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements for service poles and service posts |
| S.I. 2016 No. 1101 | EN 50106:2008 | Safety of household and similar electrical appliances - Particular rules for routine tests referring to appliances under the scope of EN 60335-1 |
| S.I. 2016 No. 1101 | EN 50117-1:2002 | Coaxial cables - Part 1: Generic specification |
| S.I. 2016 No. 1101 | EN 50117-2-1:2005 | Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz |
| S.I. 2016 No. 1101 | EN 50117-2-2:2004 | Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz |
| S.I. 2016 No. 1101 | EN 50117-2-3:2004 | Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz |
| S.I. 2016 No. 1101 | EN 50117-2-4:2004 | Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
| S.I. 2016 No. 1101 | EN 50117-2-5:2004 | Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz |
| S.I. 2016 No. 1101 | EN 50117-3-1:2002 | Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom applications - Miniaturized cables used in digital communication systems |
| S.I. 2016 No. 1101 | EN 50117-4-1:2008 | Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordance with EN 50173 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
| S.I. 2016 No. 1101 | EN 50117-4-2:2015 | Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cabled distribution networks |
| S.I. 2016 No. 1101 | EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
| S.I. 2016 No. 1101 | EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems |
| S.I. 2016 No. 1101 | EN 50178:1997 | Electronic equipment for use in power installations |
| S.I. 2016 No. 1101 | EN 50214:2006 | Flat polyvinyl chloride sheathed flexible cables |
| S.I. 2016 No. 1101 | EN 50214:2024 | Flat flexible cables |
| S.I. 2016 No. 1101 | EN 50250:2002 | Conversion adaptors for industrial use |
| S.I. 2016 No. 1101 | EN 50274:2002 | Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts |
| S.I. 2016 No. 1101 | EN 50288-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 1: Generic specification |
| S.I. 2016 No. 1101 | EN 50288-2-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-1: Sectional specification for screened cables characterised up to 100 MHz - Horizontal and building backbone cables |
| S.I. 2016 No. 1101 | EN 50288-2-2:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterised up to 100 MHz - Work area and patch cord cables |
| S.I. 2016 No. 1101 | EN 50288-3-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-1: Sectional specification for unscreened cables characterised up to 100 MHz - Horizontal and building backbone cables |
| S.I. 2016 No. 1101 | EN 50288-3-2:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 3-2: Sectional specification for unscreened cables characterised up to 100 MHz - Work area and patch cord cables |
| S.I. 2016 No. 1101 | EN 50288-4-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-1: Sectional specification for screened cables characterised up to 600 MHz - Horizontal and building backbone cables |
| S.I. 2016 No. 1101 | EN 50288-4-2:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 4-2: Sectional specification for screened cables characterised up to 600 MHz - Work area and patch cord cables |
| S.I. 2016 No. 1101 | EN 50288-5-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 5-1: Sectional specification for screened cables characterized up to 250 MHz - Horizontal and building backbone cables |
| S.I. 2016 No. 1101 | EN 50288-5-2:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 5-2: Sectional specification for screened cables characterized up to 250 MHz - Work area and patch cord cables |
| S.I. 2016 No. 1101 | EN 50288-6-1:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 6-1: Sectional specification for unscreened cables characterised up to 250 MHz - Horizontal and building backbone cables |
| S.I. 2016 No. 1101 | EN 50288-6-2:2013 | Multi-element metallic cables used in analogue and digital communication and control - Part 6-2: Sectional specification for unscreened cables characterised up to 250 MHz - Work area and patch cord cables |
| S.I. 2016 No. 1101 | EN 50288-7:2005 | Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables |
| S.I. 2016 No. 1101 | EN 50288-8:2012 | Multi-element metallic cables used in analogue and digital communication and control - Part 8: Specification for type 1 cables characterised up to 2 MHz |
| S.I. 2016 No. 1101 | EN 50288-9-1:2012 | Multi-element metallic cables used in analogue and digital communication and control - Part 9-1: Sectional specification for screened cables characterised up to 1 000 MHz - Horizontal and building backbone cables |
| S.I. 2016 No. 1101 | EN 50288-9-2:2015 | Multi-element metallic cables used in analogue and digital communication and control - Part 9-2: Sectional specification for screened cables characterized from 1 MHz up to 1 000 MHz for work area, patch cord and data centre applications |
| S.I. 2016 No. 1101 | EN 50288-10-1:2012 | Multi-element metallic cables used in analogue and digital communication and control - Part 10-1: Sectional specification for screened cables characterized up to 500 MHz - Horizontal floor and building backbone cables |
| S.I. 2016 No. 1101 | EN 50288-10-2:2015 | Multi-element metallic cables used in analogue and digital communication and control - Part 10-2: Sectional specification for screened cables characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications |
| S.I. 2016 No. 1101 | EN 50288-11-1:2012 | Multi-element metallic cables used in analogue and digital communication and control - Part 11-1: Sectional specification for un-screened cables characterised up to 500 MHz - Horizontal and building backbone cables |
| S.I. 2016 No. 1101 | EN 50288-11-2:2015 | Multi-element metallic cables used in analogue and digital communication and control - Part 11-2: Sectional specification for un-screened cables, characterized from 1 MHz up to 500 MHz for work area, patch cord and data centre applications |
| S.I. 2016 No. 1101 | EN 50289-1-3:2001 | Communication cables - Specifications for test methods - Part 1-3: Electrical test methods - Dielectric strength |
| S.I. 2016 No. 1101 | EN 50289-1-4:2001 | Communication cables - Specifications for test methods - Part 1-4: Electrical test methods - Insulation resistance |
| S.I. 2016 No. 1101 | EN 50290-2-1:2005 | Communication cables - Part 2-1: Common design rules and construction |
| S.I. 2016 No. 1101 | EN 50290-2-20:2001 | Communication cables - Part 2-20: Common design rules and construction - General |
| S.I. 2016 No. 1101 | EN 50290-2-21:2001 | Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds |
| S.I. 2016 No. 1101 | EN 50290-2-22:2001 | Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds |
| S.I. 2016 No. 1101 | EN 50290-2-23:2013 | Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
| S.I. 2016 No. 1101 | EN 50290-2-24:2002 | Communication cables - Part 2-24: Common design rules and construction - PE sheathing |
| S.I. 2016 No. 1101 | EN 50290-2-25:2013 | Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds |
| S.I. 2016 No. 1101 | EN 50290-2-26:2002 | Communication cables - Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds |
| S.I. 2016 No. 1101 | EN 50290-2-27:2002 | Communication cables - Part 2-27: Common design rules and construction - Halogen free flame retardant thermoplastic sheathing compounds |
| S.I. 2016 No. 1101 | EN 50290-2-28:2002 | Communication cables - Part 2-28: Common design rules and construction - Filling compounds for filled cables |
| S.I. 2016 No. 1101 | EN 50290-2-29:2002 | Communication cables - Part 2-29: Common design rules and construction - Cross-linked PE insulation compounds |
| S.I. 2016 No. 1101 | EN 50290-2-30:2002 | Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroethylene-hexafluoropropylene) (FEP) insulation and sheathing |
| S.I. 2016 No. 1101 | EN 50290-4-1:2014 | Communication cables - Part 4-1: General considerations for the use of cables - Environmental conditions and safety aspects |
| S.I. 2016 No. 1101 | EN 50290-4-2:2014 | Communication cables - Part 4-2: General considerations for the use of cables - Guide to use |
| S.I. 2016 No. 1101 | EN 50363-0:2011 | Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction |
| S.I. 2016 No. 1101 | EN 50363-1:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross-linked elastomeric insulating compounds |
| S.I. 2016 No. 1101 | EN 50363-2-1:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds |
| S.I. 2016 No. 1101 | EN 50363-2-2:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cross-linked elastomeric covering compounds |
| S.I. 2016 No. 1101 | EN 50363-3:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds |
| S.I. 2016 No. 1101 | EN 50363-4-1:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC sheathing compounds |
| S.I. 2016 No. 1101 | EN 50363-4-2:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC covering compounds |
| S.I. 2016 No. 1101 | EN 50363-5:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating compounds |
| S.I. 2016 No. 1101 | EN 50363-6:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halogen-free, cross-linked sheathing compounds |
| S.I. 2016 No. 1101 | EN 50363-7:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halogen-free, thermoplastic insulating compounds |
| S.I. 2016 No. 1101 | EN 50363-8:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds |
| S.I. 2016 No. 1101 | EN 50363-9-1:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC) |
| S.I. 2016 No. 1101 | EN 50363-10-1:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC) |
| S.I. 2016 No. 1101 | EN 50363-10-2:2005 | Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Miscellaneous sheathing compounds - Thermoplastic polyurethane |
| S.I. 2016 No. 1101 | EN 50364:2010 | Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
| S.I. 2016 No. 1101 | EN 50369:2005 | Liquid tight sheathing systems for cable management |
| S.I. 2016 No. 1101 | EN 50395:2005 | Electrical test methods for low voltage energy cables |
| S.I. 2016 No. 1101 | EN 50396:2005 | Non electrical test methods for low voltage energy cables |
| S.I. 2016 No. 1101 | EN 50406-1:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables |
| S.I. 2016 No. 1101 | EN 50406-2:2004 | End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct and buried cables |
| S.I. 2016 No. 1101 | EN 50407-1:2004 | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1: Outdoor cables |
| S.I. 2016 No. 1101 | EN 50407-3:2014 | Multi-pair cables used in high bit rate digital access telecommunications networks - Part 3: Indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 100 Mbit/s over IP |
| S.I. 2016 No. 1101 | EN 50428:2005 | Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES) |
| S.I. 2016 No. 1101 | EN 50441-1:2012 | Cables for indoor residential telecommunication installations - Part 1: Unscreened cables - Grade 1 |
| S.I. 2016 No. 1101 | EN 50441-2:2012 | Cables for indoor residential telecommunication installations - Part 2: Screened cables - Grade 1 |
| S.I. 2016 No. 1101 | EN 50441-3:2006 | Cables for indoor residential telecommunication installations - Part 3: Screened cables - Grade 3 |
| S.I. 2016 No. 1101 | EN 50441-4:2012 | Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200 MHz - Grade 3 |
| S.I. 2016 No. 1101 | EN 50445:2008 | Product family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) |
| S.I. 2016 No. 1101 | EN 50491-3:2009 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |
| S.I. 2016 No. 1101 | EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| S.I. 2016 No. 1101 | EN 50491-6-1:2014 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations - Installation and planning |
| S.I. 2016 No. 1101 | EN 50497:2007 | Recommended test method for assessment of the risk of plasticizer exudation from PVC insulated and sheathed cables |
| S.I. 2016 No. 1101 | EN 50520:2009 | Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations |
| S.I. 2016 No. 1101 | EN 50520:2020 | Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations |
| S.I. 2016 No. 1101 | EN 50525-1:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 50525-2-11:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation |
| S.I. 2016 No. 1101 | EN 50525-2-12:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads |
| S.I. 2016 No. 1101 | EN 50525-2-21:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation |
| S.I. 2016 No. 1101 | EN 50525-2-22:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation |
| S.I. 2016 No. 1101 | EN 50525-2-31:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation |
| S.I. 2016 No. 1101 | EN 50525-2-41:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation |
| S.I. 2016 No. 1101 | EN 50525-2-42:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation |
| S.I. 2016 No. 1101 | EN 50525-2-51:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation |
| S.I. 2016 No. 1101 | EN 50525-2-71:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation |
| S.I. 2016 No. 1101 | EN 50525-2-72:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation |
| S.I. 2016 No. 1101 | EN 50525-2-81:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding |
| S.I. 2016 No. 1101 | EN 50525-2-82:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains |
| S.I. 2016 No. 1101 | EN 50525-2-83:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation |
| S.I. 2016 No. 1101 | EN 50525-3-11:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
| S.I. 2016 No. 1101 | EN 50525-3-21:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke |
| S.I. 2016 No. 1101 | EN 50525-3-31:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke |
| S.I. 2016 No. 1101 | EN 50525-3-41:2011 | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-41: Cables with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke |
| S.I. 2016 No. 1101 | EN 50539-11:2013 | Low-voltage surge protective devices - Surge protective devices for specific application including d.c. - Part 11: Requirements and tests for SPDs in photovoltaic applications |
| S.I. 2016 No. 1101 | EN 50550:2011 | Power frequency overvoltage protective device for household and similar applications (POP) |
| S.I. 2016 No. 1101 | EN 50556:2011 | Road traffic signal systems |
| S.I. 2016 No. 1101 | EN 50557:2011 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| S.I. 2016 No. 1101 | EN 50565-1:2014 | Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 1: General guidance |
| S.I. 2016 No. 1101 | EN 50565-2:2014 | Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance related to EN 50525 cable types |
| S.I. 2016 No. 1101 | EN 50615:2015 | Household and similar electrical appliances - Safety - Particular requirements for devices for fire prevention and suppression for electric hobs (cooktops) |
| S.I. 2016 No. 1101 | EN 50618:2014 | Electric cables for photovoltaic systems |
| S.I. 2016 No. 1101 | EN 50620:2017 | Electric cables - Charging cables for electric vehicles |
| S.I. 2016 No. 1101 | EN 50620:2017 | Electric cables – Charging cables for electric vehicles |
| S.I. 2016 No. 1101 | EN 50626-1:2023 | Conduit systems buried underground for the protection and management of insulated electrical cables or communication cables - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 50626-2:2023 | Conduit systems buried underground for the protection and management of insulated electrical cables or communication cables - Part 2: Polyethylene (PE), Polypropylene (PP) or Unplasticized poly(vinyl chloride)(PVC-U) conduit systems - Requirements for solid wall conduits, fittings and the system used in special applications |
| S.I. 2016 No. 1101 | EN 50689:2021 | Safety of laser products - Particular Requirements for Consumer Laser Products |
| S.I. 2016 No. 1101 | EN 60034-1:2010 | Rotating electrical machines - Part 1: Rating and performance |
| S.I. 2016 No. 1101 | EN 60034-5:2001 | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
| S.I. 2016 No. 1101 | EN 60034-6:1993 | Rotating electrical machines - Part 6: Methods of cooling (IC Code) |
| S.I. 2016 No. 1101 | EN 60034-7:1993 | Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) |
| S.I. 2016 No. 1101 | EN 60034-8:2007 | Rotating electrical machines - Part 8: Terminal markings and direction of rotation |
| S.I. 2016 No. 1101 | EN 60034-9:2005 | Rotating electrical machines - Part 9: Noise limits |
| S.I. 2016 No. 1101 | EN 60034-11:2004 | Rotating electrical machines - Part 11: Thermal protection |
| S.I. 2016 No. 1101 | EN 60034-12:2002 | Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors |
| S.I. 2016 No. 1101 | EN 60034-14:2004 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| S.I. 2016 No. 1101 | EN 60051-1:1998 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts |
| S.I. 2016 No. 1101 | EN 60051-2:1989 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters |
| S.I. 2016 No. 1101 | EN 60051-3:1989 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters |
| S.I. 2016 No. 1101 | EN 60051-4:1989 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters |
| S.I. 2016 No. 1101 | EN 60051-5:1989 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes |
| S.I. 2016 No. 1101 | EN 60051-6:1989 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters |
| S.I. 2016 No. 1101 | EN 60051-7:1989 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments |
| S.I. 2016 No. 1101 | EN 60051-8:1989 | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories |
| S.I. 2016 No. 1101 | EN 60051-9:1989 | Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 9: Recommended test methods |
| S.I. 2016 No. 1101 | EN 60110-1:1998 | Power capacitors for induction heating installations - Part 1: General |
| S.I. 2016 No. 1101 | EN 60127-1:2006 | Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links |
| S.I. 2016 No. 1101 | EN 60127-2:2014 | Miniature fuses - Part 2: Cartridge fuse-links |
| S.I. 2016 No. 1101 | EN 60127-3:1996 | Miniature fuses - Part 3: Sub-miniature fuse-links |
| S.I. 2016 No. 1101 | EN 60127-4:2005 | Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types |
| S.I. 2016 No. 1101 | EN 60127-6:2014 | Miniature fuses - Part 6: Fuse-holders for miniature fuse-links |
| S.I. 2016 No. 1101 | EN 60127-7:2016 | Miniature fuses - Part 7: Miniature fuse-links for special applications |
| S.I. 2016 No. 1101 | EN 60143-2:2013 | Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks |
| S.I. 2016 No. 1101 | EN 60155:1995 | Glow-starters for fluorescent lamps |
| S.I. 2016 No. 1101 | EN 60204-1:2006 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60204-1:2018 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| S.I. 2016 No. 1101 | EN 60215:1989 | Safety requirements for radio transmitting equipment |
| S.I. 2016 No. 1101 | EN 60228:2005 | Conductors of insulated cables |
| S.I. 2016 No. 1101 | EN 60238:2004 | Edison screw lampholders |
| S.I. 2016 No. 1101 | EN IEC 60238:2018 | Edison screw lampholders |
| S.I. 2016 No. 1101 | EN IEC 60238:2018 | Edison screw lampholders |
| S.I. 2016 No. 1101 | EN 60252-1:2011 | AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation |
| S.I. 2016 No. 1101 | EN 60252-2:2011 | AC motor capacitors - Part 2: Motor start capacitors |
| S.I. 2016 No. 1101 | EN 60255-27:2014 | Measuring relays and protection equipment - Part 27: Product safety requirements |
| S.I. 2016 No. 1101 | EN 60269-1:2007 | Low-voltage fuses - Part 1: General requirements |
| S.I. 2016 No. 1101 | HD 60269-2:2013 | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K |
| S.I. 2016 No. 1101 | HD 60269-3:2010 | Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F |
| S.I. 2016 No. 1101 | EN 60269-4:2009 | Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices |
| S.I. 2016 No. 1101 | EN 60269-6:2011 | Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems |
| S.I. 2016 No. 1101 | EN 60309-1:1999 | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60309-2:1999 | Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories |
| S.I. 2016 No. 1101 | EN 60309-4:2007 | Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock |
| S.I. 2016 No. 1101 | EN 60320-1:2001 | Appliance couplers for household and similar general purposes - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN IEC 60320-1:2021 | Appliance couplers for household and similar general purposes - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60320-2-1:2000 | Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers |
| S.I. 2016 No. 1101 | EN 60320-2-2:1998 | Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment |
| S.I. 2016 No. 1101 | EN 60320-2-4:2006 | Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement |
| S.I. 2016 No. 1101 | EN IEC 60320-2-4:2021 | Appliance couplers for household and similar general purposes - Part 2-4: Appliance couplers dependent on appliance weight for engagement |
| S.I. 2016 No. 1101 | EN 60332-1-1:2004 | Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus |
| S.I. 2016 No. 1101 | EN 60332-1-2:2004 | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame |
| S.I. 2016 No. 1101 | EN 60332-1-3:2004 | Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles |
| S.I. 2016 No. 1101 | EN 60332-2-1:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus |
| S.I. 2016 No. 1101 | EN 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| S.I. 2016 No. 1101 | EN 60332-3-10:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus |
| S.I. 2016 No. 1101 | EN 60332-3-21:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R |
| S.I. 2016 No. 1101 | EN 60332-3-22:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A |
| S.I. 2016 No. 1101 | EN 60332-3-23:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B |
| S.I. 2016 No. 1101 | EN 60332-3-24:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C |
| S.I. 2016 No. 1101 | EN 60332-3-25:2009 | Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D |
| S.I. 2016 No. 1101 | EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60335-2-2:2010 | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
| S.I. 2016 No. 1101 | EN 60335-2-3:2016 | Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons |
| S.I. 2016 No. 1101 | EN 60335-2-3:2016 | Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons |
| S.I. 2016 No. 1101 | EN 60335-2-4:2010 | Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors |
| S.I. 2016 No. 1101 | EN 60335-2-4:2010 | Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors |
| S.I. 2016 No. 1101 | EN 60335-2-4:2010 | Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors |
| S.I. 2016 No. 1101 | EN 60335-2-5:2015 | Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers |
| S.I. 2016 No. 1101 | EN 60335-2-5:2015 | Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers |
| S.I. 2016 No. 1101 | EN 60335-2-5:2015 | Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers |
| S.I. 2016 No. 1101 | EN 60335-2-6:2015 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-6:2015 | Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-7:2010 | Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines |
| S.I. 2016 No. 1101 | EN 60335-2-7:2010 | Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines |
| S.I. 2016 No. 1101 | EN 60335-2-8:2015 | Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-9:2003 | Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
| S.I. 2016 No. 1101 | EN 60335-2-10:2003 | Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines |
| S.I. 2016 No. 1101 | EN 60335-2-11:2010 | Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers |
| S.I. 2016 No. 1101 | EN IEC 60335-2-11:2022 | Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers |
| S.I. 2016 No. 1101 | EN 60335-2-12:2003 | Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-12:2003 | Household and similar electrical appliances - Safety - Part 2-12: Particular requirements for warming plates and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-13:2010 | Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-13:2010 | Household and similar electrical appliances - Safety - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-15:2002 | Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids |
| S.I. 2016 No. 1101 | EN 60335-2-15:2016 | Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids |
| S.I. 2016 No. 1101 | EN 60335-2-15:2016 | Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids |
| S.I. 2016 No. 1101 | EN 60335-2-16:2003 | Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers |
| S.I. 2016 No. 1101 | EN 60335-2-16:2003 | Household and similar electrical appliances - Safety - Part 2-16: Particular requirements for food waste disposers |
| S.I. 2016 No. 1101 | EN 60335-2-17:2013 | Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
| S.I. 2016 No. 1101 | EN 60335-2-17:2013 | Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
| S.I. 2016 No. 1101 | EN 60335-2-17:2013 | Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
| S.I. 2016 No. 1101 | EN 60335-2-17:2013 | Household and similar electrical appliances - Safety - Part 2-17: Particular requirements for blankets, pads, clothing and similar flexible heating appliances |
| S.I. 2016 No. 1101 | EN 60335-2-21:2003 | Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
| S.I. 2016 No. 1101 | EN 60335-2-21:2021 | Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
| S.I. 2016 No. 1101 | EN 60335-2-21:2021 | Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
| S.I. 2016 No. 1101 | EN 60335-2-23:2003 | Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care |
| S.I. 2016 No. 1101 | EN 60335-2-24:2010 | Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
| S.I. 2016 No. 1101 | EN IEC 60335-2-24:2022 | Household and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
| S.I. 2016 No. 1101 | EN 60335-2-25:2012 | Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens |
| S.I. 2016 No. 1101 | EN 60335-2-26:2003 | Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks |
| S.I. 2016 No. 1101 | EN 60335-2-27:2013 | Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation |
| S.I. 2016 No. 1101 | EN 60335-2-27:2013 | Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation |
| S.I. 2016 No. 1101 | EN 60335-2-27:2013 | Household and similar electrical appliances – Safety – Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation |
| S.I. 2016 No. 1101 | EN 60335-2-28:2003 | Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines |
| S.I. 2016 No. 1101 | EN 60335-2-28:2003 | Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines |
| S.I. 2016 No. 1101 | EN 60335-2-29:2004 | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
| S.I. 2016 No. 1101 | EN 60335-2-29:2004 | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
| S.I. 2016 No. 1101 | EN 60335-2-29:2021 | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
| S.I. 2016 No. 1101 | EN 60335-2-30:2009 | Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters |
| S.I. 2016 No. 1101 | EN 60335-2-30:2009 | Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters |
| S.I. 2016 No. 1101 | EN 60335-2-30:2009 | Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters |
| S.I. 2016 No. 1101 | EN 60335-2-31:2014 | Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors |
| S.I. 2016 No. 1101 | EN 60335-2-32:2003 | Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances |
| S.I. 2016 No. 1101 | EN 60335-2-34:2013 | Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors |
| S.I. 2016 No. 1101 | EN 60335-2-35:2016 | Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters |
| S.I. 2016 No. 1101 | EN 60335-2-35:2016 | Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters |
| S.I. 2016 No. 1101 | EN 60335-2-35:2016 | Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters |
| S.I. 2016 No. 1101 | EN 60335-2-36:2002 | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
| S.I. 2016 No. 1101 | EN 60335-2-37:2002 | Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers |
| S.I. 2016 No. 1101 | EN 60335-2-38:2003 | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
| S.I. 2016 No. 1101 | EN 60335-2-39:2003 | Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans |
| S.I. 2016 No. 1101 | EN 60335-2-40:2003 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| S.I. 2016 No. 1101 | EN 60335-2-41:2003 | Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps |
| S.I. 2016 No. 1101 | EN IEC 60335-2-41:2021 | Household and similar electrical appliances - Safety - Particular requirements for pumps |
| S.I. 2016 No. 1101 | EN 60335-2-42:2003 | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
| S.I. 2016 No. 1101 | EN 60335-2-43:2003 | Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails |
| S.I. 2016 No. 1101 | EN IEC 60335-2-43:2020 | Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails |
| S.I. 2016 No. 1101 | EN 60335-2-44:2002 | Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers |
| S.I. 2016 No. 1101 | EN 60335-2-45:2002 | Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-47:2003 | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
| S.I. 2016 No. 1101 | EN 60335-2-47:2003 | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
| S.I. 2016 No. 1101 | EN 60335-2-48:2003 | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
| S.I. 2016 No. 1101 | EN 60335-2-48:2003 | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
| S.I. 2016 No. 1101 | EN 60335-2-49:2003 | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
| S.I. 2016 No. 1101 | EN 60335-2-49:2003 | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
| S.I. 2016 No. 1101 | EN 60335-2-50:2003 | Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
| S.I. 2016 No. 1101 | EN 60335-2-51:2003 | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
| S.I. 2016 No. 1101 | EN IEC 60335-2-51:2023 | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
| S.I. 2016 No. 1101 | EN 60335-2-52:2003 | Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances |
| S.I. 2016 No. 1101 | EN 60335-2-52:2003 | Household and similar electrical appliances - Safety - Part 2-52: Particular requirements for oral hygiene appliances |
| S.I. 2016 No. 1101 | EN 60335-2-53:2011 | Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances and infrared cabins |
| S.I. 2016 No. 1101 | EN 60335-2-54:2008 | Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam |
| S.I. 2016 No. 1101 | EN 60335-2-54:2008 | Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam |
| S.I. 2016 No. 1101 | EN 60335-2-55:2003 | Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds |
| S.I. 2016 No. 1101 | EN 60335-2-55:2003 | Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds |
| S.I. 2016 No. 1101 | EN 60335-2-56:2003 | Household and similar electrical appliances - Safety - Part 2-56: Particular requirements for projectors and similar appliances |
| S.I. 2016 No. 1101 | EN 60335-2-58:2005 | Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines |
| S.I. 2016 No. 1101 | EN 60335-2-59:2003 | Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers |
| S.I. 2016 No. 1101 | EN 60335-2-59:2003 | Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers |
| S.I. 2016 No. 1101 | EN 60335-2-60:2003 | Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas |
| S.I. 2016 No. 1101 | EN 60335-2-61:2003 | Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters |
| S.I. 2016 No. 1101 | EN 60335-2-61:2003 | Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters |
| S.I. 2016 No. 1101 | EN 60335-2-61:2003 | Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal-storage room heaters |
| S.I. 2016 No. 1101 | EN 60335-2-62:2003 | Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks |
| S.I. 2016 No. 1101 | EN 60335-2-65:2003 | Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances |
| S.I. 2016 No. 1101 | EN 60335-2-66:2003 | Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters |
| S.I. 2016 No. 1101 | EN 60335-2-66:2003 | Household and similar electrical appliances - Safety - Part 2-66: Particular requirements for water-bed heaters |
| S.I. 2016 No. 1101 | EN 60335-2-70:2002 | Household and similar electrical appliances - Safety - Part 2-70: Particular requirements for milking machines |
| S.I. 2016 No. 1101 | EN 60335-2-71:2003 | Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals |
| S.I. 2016 No. 1101 | EN 60335-2-73:2003 | Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters |
| S.I. 2016 No. 1101 | EN 60335-2-73:2003 | Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters |
| S.I. 2016 No. 1101 | EN 60335-2-74:2003 | Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters |
| S.I. 2016 No. 1101 | EN 60335-2-74:2003 | Household and similar electrical appliances - Safety - Part 2-74: Particular requirements for portable immersion heaters |
| S.I. 2016 No. 1101 | EN 60335-2-75:2004 | Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines |
| S.I. 2016 No. 1101 | EN 60335-2-78:2003 | Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues |
| S.I. 2016 No. 1101 | EN 60335-2-78:2003 | Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues |
| S.I. 2016 No. 1101 | EN 60335-2-80:2003 | +6Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
| S.I. 2016 No. 1101 | EN 60335-2-81:2003 | Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats |
| S.I. 2016 No. 1101 | EN 60335-2-82:2003 | Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines |
| S.I. 2016 No. 1101 | EN 60335-2-82:2003 | Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines |
| S.I. 2016 No. 1101 | EN 60335-2-83:2002 | Household and similar electrical appliances - Safety - Part 2-83: Particular requirements for heated gullies for roof drainage |
| S.I. 2016 No. 1101 | EN 60335-2-84:2003 | Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets |
| S.I. 2016 No. 1101 | EN 60335-2-84:2003 | Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets |
| S.I. 2016 No. 1101 | EN IEC 60335-2-84:2021 | Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets |
| S.I. 2016 No. 1101 | EN IEC 60335-2-84:2021 | Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets |
| S.I. 2016 No. 1101 | EN 60335-2-85:2003 | Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers |
| S.I. 2016 No. 1101 | EN 60335-2-85:2003 | Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers |
| S.I. 2016 No. 1101 | EN 60335-2-85:2003 | Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers |
| S.I. 2016 No. 1101 | EN 60335-2-86:2003 | Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines |
| S.I. 2016 No. 1101 | EN 60335-2-87:2002 | Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment |
| S.I. 2016 No. 1101 | EN 60335-2-87:2002 | Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment |
| S.I. 2016 No. 1101 | EN 60335-2-88:2002 | Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation, or air-conditioning systems |
| S.I. 2016 No. 1101 | EN 60335-2-90:2006 | Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens |
| S.I. 2016 No. 1101 | EN 60335-2-96:2002 | Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating |
| S.I. 2016 No. 1101 | EN IEC 60335-2-96:2021 | Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating |
| S.I. 2016 No. 1101 | EN 60335-2-97:2006 | Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment |
| S.I. 2016 No. 1101 | EN 60335-2-98:2003 | Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers |
| S.I. 2016 No. 1101 | EN 60335-2-98:2003 | Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers |
| S.I. 2016 No. 1101 | EN 60335-2-99:2003 | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
| S.I. 2016 No. 1101 | EN 60335-2-101:2002 | Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers |
| S.I. 2016 No. 1101 | EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| S.I. 2016 No. 1101 | EN 60335-2-105:2005 | Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets |
| S.I. 2016 No. 1101 | EN 60335-2-105:2005 | Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets |
| S.I. 2016 No. 1101 | EN IEC 60335-2-105:2021 | Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets |
| S.I. 2016 No. 1101 | EN 60335-2-106:2007 | Household and similar electrical appliances - Safety - Part 2-106: Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings |
| S.I. 2016 No. 1101 | EN 60335-2-108:2008 | Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers |
| S.I. 2016 No. 1101 | EN 60335-2-109:2010 | Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances |
| S.I. 2016 No. 1101 | EN 60335-2-109:2010 | Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances |
| S.I. 2016 No. 1101 | EN IEC 60335‑2‑113:2023 | Household and similar electrical appliances - Safety - Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources (IEC 60335-2-113:2016) |
| S.I. 2016 No. 1101 | EN 60358-1:2012 | Coupling capacitors and capacitor dividers - Part 1: General rules |
| S.I. 2016 No. 1101 | EN 60360:1998 | Standard method of measurement of lamp cap temperature rise |
| S.I. 2016 No. 1101 | EN 60399:2004 | Barrel thread for lampholders with shade holder ring |
| S.I. 2016 No. 1101 | EN 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| S.I. 2016 No. 1101 | EN 60400:2017 | Lampholders for tubular fluorescent lamps and starterholders |
| S.I. 2016 No. 1101 | EN 60423:2007 | Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings |
| S.I. 2016 No. 1101 | EN 60432-1:2000 | Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| S.I. 2016 No. 1101 | EN 60432-2:2000 | Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes |
| S.I. 2016 No. 1101 | EN 60432-3:2013 | Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle) |
| S.I. 2016 No. 1101 | EN 60477:1997 | Laboratory d.c. resistors |
| S.I. 2016 No. 1101 | EN 60477-2:1997 | Laboratory resistors - Part 2: Laboratory a.c. resistors |
| S.I. 2016 No. 1101 | EN 60519-1:2015 | Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60519-2:2006 | Safety in electroheat installations - Part 2: Particular requirements for resistance heating equipment |
| S.I. 2016 No. 1101 | EN 60519-3:2005 | Safety in electroheat installations - Part 3: Particular requirements for induction and conduction heating and induction melting installations |
| S.I. 2016 No. 1101 | EN 60519-4:2013 | Safety in electroheating installations - Part 4: Particular requirements for arc furnace installations |
| S.I. 2016 No. 1101 | EN 60519-6:2011 | Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment |
| S.I. 2016 No. 1101 | EN 60519-7:2008 | Safety in electroheat installations - Part 7: Particular requirements for installations with electron guns |
| S.I. 2016 No. 1101 | EN 60519-8:2005 | Safety in electroheat installations - Part 8: Particular requirements for electroslag remelting furnaces |
| S.I. 2016 No. 1101 | EN 60519-9:2005 | Safety in electroheat installations - Part 9: Particular requirements for high-frequency dielectric heating installations |
| S.I. 2016 No. 1101 | EN 60519-10:2013 | Safety in electroheating installations - Part 10: Particular requirements for electrical resistance trace heating systems for industrial and commercial applications |
| S.I. 2016 No. 1101 | EN 60519-12:2013 | Safety in electroheating installations - Part 12: Particular requirements for infrared electroheating installations |
| S.I. 2016 No. 1101 | EN 60519-21:2009 | Safety in electroheat installations - Part 21: Particular requirements for resistance heating equipment - Heating and melting glass equipment |
| S.I. 2016 No. 1101 | EN 60523:1993 | Direct-current potentiometers |
| S.I. 2016 No. 1101 | EN 60524:1993 | Direct-current resistive volt ratio boxes |
| S.I. 2016 No. 1101 | EN 60529:1991 | Degrees of protection provided by enclosures (IP Code) |
| S.I. 2016 No. 1101 | EN 60564:1993 | D.C. bridges for measuring resistance |
| S.I. 2016 No. 1101 | EN 60570:2003 | Electrical supply track systems for luminaires |
| S.I. 2016 No. 1101 | EN 60570:2003 | Electrical supply track systems for luminaires |
| S.I. 2016 No. 1101 | EN 60570:2003 | Electrical supply track systems for luminaires |
| S.I. 2016 No. 1101 | EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
| S.I. 2016 No. 1101 | EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
| S.I. 2016 No. 1101 | EN IEC 60598-1:2021 | Luminaires - Part 1: General requirements and tests |
| S.I. 2016 No. 1101 | EN 60598-2-1:1989 | Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires |
| S.I. 2016 No. 1101 | EN 60598-2-2:2012 | Luminaires - Part 2-2: Particular requirements - Recessed luminaires |
| S.I. 2016 No. 1101 | EN 60598-2-3:2003 | Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting |
| S.I. 2016 No. 1101 | EN 60598-2-4:1997 | Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires |
| S.I. 2016 No. 1101 | EN 60598-2-4:2018 | Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires |
| S.I. 2016 No. 1101 | EN 60598-2-5:2015 | Luminaires - Part 2-5: Particular requirements - Floodlights |
| S.I. 2016 No. 1101 | EN 60598-2-7:1989 | Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden use |
| S.I. 2016 No. 1101 | EN 60598-2-8:2013 | Luminaires - Part 2-8: Particular requirements - Handlamps |
| S.I. 2016 No. 1101 | EN 60598-2-9:1989 | Luminaires - Part 2: Particular requirements - Section 9: Photo and film luminaires (non-professional) |
| S.I. 2016 No. 1101 | EN 60598-2-10:2003 | Luminaires - Part 2-10: Particular requirements - Portable luminaires for children |
| S.I. 2016 No. 1101 | EN 60598-2-11:2013 | Luminaires - Part 2-11: Particular requirements - Aquarium luminaires |
| S.I. 2016 No. 1101 | EN 60598-2-11:2013 | Luminaires - Part 2-11: Particular requirements - Aquarium luminaires |
| S.I. 2016 No. 1101 | EN 60598-2-12:2013 | Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights |
| S.I. 2016 No. 1101 | EN 60598-2-13:2006 | Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires |
| S.I. 2016 No. 1101 | EN 60598-2-13:2006 | Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires |
| S.I. 2016 No. 1101 | EN 60598-2-14:2009 | Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment |
| S.I. 2016 No. 1101 | EN 60598-2-17:1989 | Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor) |
| S.I. 2016 No. 1101 | EN IEC 60598-2-17:2018 | Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, television and film studios (outdoor and indoor) |
| S.I. 2016 No. 1101 | EN 60598-2-19:1989 | Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety requirements) |
| S.I. 2016 No. 1101 | EN 60598-2-20:2015 | Luminaires - Part 2-20: Particular requirements - Lighting chains |
| S.I. 2016 No. 1101 | EN 60598-2-20:2015 | Luminaires - Part 2-20: Particular requirements - Lighting chains |
| S.I. 2016 No. 1101 | EN 60598-2-21:2015 | Luminaires - Part 2-21: Particular requirements - Rope lights |
| S.I. 2016 No. 1101 | EN 60598-2-21:2015 | Luminaires - Part 2-21: Particular requirements - Rope lights |
| S.I. 2016 No. 1101 | EN 60598-2-22:2014 | Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting |
| S.I. 2016 No. 1101 | EN 60598-2-22:2014 | Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting |
| S.I. 2016 No. 1101 | EN IEC 60598-2-22:2022 | Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting |
| S.I. 2016 No. 1101 | EN 60598-2-23:1996 | Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps |
| S.I. 2016 No. 1101 | EN IEC 60598-2-23:2021 | Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for filament lamps |
| S.I. 2016 No. 1101 | EN 60598-2-24:2013 | Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
| S.I. 2016 No. 1101 | EN 60598-2-25:1994 | Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of hospitals and health care buildings |
| S.I. 2016 No. 1101 | EN 60618:1997 | Inductive voltage dividers |
| S.I. 2016 No. 1101 | EN 60645-1:2015 | Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry |
| S.I. 2016 No. 1101 | EN 60645-3:2007 | Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration |
| S.I. 2016 No. 1101 | EN 60645-6:2010 | Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoacoustic emissions |
| S.I. 2016 No. 1101 | EN 60645-7:2010 | Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of auditory brainstem responses |
| S.I. 2016 No. 1101 | EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| S.I. 2016 No. 1101 | EN 60664-3:2003 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| S.I. 2016 No. 1101 | EN 60664-4:2006 | Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
| S.I. 2016 No. 1101 | EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60669-2-1:2004 | Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches |
| S.I. 2016 No. 1101 | EN 60669-2-2:2006 | Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS) |
| S.I. 2016 No. 1101 | EN 60669-2-3:2006 | Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time delay switches (TDS) |
| S.I. 2016 No. 1101 | EN 60669-2-4:2005 | Switches for household and similar fixed electrical installations - Part 2-4: Particular requirements - Isolating switches |
| S.I. 2016 No. 1101 | EN 60669-2-6:2012 | Switches for household and similar fixed electrical installations - Part 2-6: Particular requirements - Fireman's switches for exterior and interior signs and luminaires |
| S.I. 2016 No. 1101 | EN 60670-1:2005 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN IEC 60670-1:2021 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60670-21:2007 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means |
| S.I. 2016 No. 1101 | EN 60670-21:2007 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means |
| S.I. 2016 No. 1101 | EN 60670-21:2007 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means |
| S.I. 2016 No. 1101 | EN 60670-22:2006 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures |
| S.I. 2016 No. 1101 | EN 60670-23:2008 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures |
| S.I. 2016 No. 1101 | EN 60670-23:2008 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures |
| S.I. 2016 No. 1101 | EN 60670-24:2013 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment |
| S.I. 2016 No. 1101 | EN 60670-24:2013 | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment |
| S.I. 2016 No. 1101 | EN 60688:2013 | Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals |
| S.I. 2016 No. 1101 | EN 60691:2003 | Thermal-links - Requirements and application guide |
| S.I. 2016 No. 1101 | EN 60691:2016 | Thermal-links - Requirements and application guide |
| S.I. 2016 No. 1101 | EN 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| S.I. 2016 No. 1101 | EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| S.I. 2016 No. 1101 | EN 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| S.I. 2016 No. 1101 | EN 60695-10-3:2002 | Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test |
| S.I. 2016 No. 1101 | EN 60695-11-2:2014 | Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame: Apparatus, confirmatory test arrangement and guidance |
| S.I. 2016 No. 1101 | EN 60695-11-3:2012 | Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods |
| S.I. 2016 No. 1101 | EN 60695-11-4:2011 | Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method |
| S.I. 2016 No. 1101 | EN 60695-11-5:2005 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| S.I. 2016 No. 1101 | EN 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| S.I. 2016 No. 1101 | EN 60695-11-20:2015 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
| S.I. 2016 No. 1101 | EN 60702-1:2002 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables |
| S.I. 2016 No. 1101 | EN 60702-2:2002 | Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations |
| S.I. 2016 No. 1101 | EN 60715:2001 | Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of electrical devices in switchgear and controlgear installations |
| S.I. 2016 No. 1101 | EN 60715:2017 | Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories |
| S.I. 2016 No. 1101 | EN 60719:1993 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
| S.I. 2016 No. 1101 | EN 60728-11:2010 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| S.I. 2016 No. 1101 | EN 60728-11:2017 | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
| S.I. 2016 No. 1101 | EN 60730-1:2011 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60730-2-2:2002 | Automatic electrical controls for household and similar use - Part 2-2: Particular requirements for thermal motor protectors |
| S.I. 2016 No. 1101 | EN 60730-2-3:2007 | Automatic electrical controls for household and similar use - Part 2-3: Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps |
| S.I. 2016 No. 1101 | EN 60730-2-4:2007 | Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type |
| S.I. 2016 No. 1101 | EN 60730-2-5:2015 | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| S.I. 2016 No. 1101 | EN 60730-2-6:2016 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| S.I. 2016 No. 1101 | EN 60730-2-7:2010 | Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches |
| S.I. 2016 No. 1101 | EN 60730-2-8:2002 | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements |
| S.I. 2016 No. 1101 | EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| S.I. 2016 No. 1101 | EN 60730-2-10:2007 | Automatic electrical controls for household and similar use - Part 2-10: Particular requirements for motor-starting relays |
| S.I. 2016 No. 1101 | EN 60730-2-11:2008 | Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators |
| S.I. 2016 No. 1101 | EN 60730-2-12:2006 | Automatic electrical controls for household and similar use - Part 2-12: Particular requirements for electrically operated door locks |
| S.I. 2016 No. 1101 | EN 60730-2-13:2008 | Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls |
| S.I. 2016 No. 1101 | EN 60730-2-14:1997 | Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators |
| S.I. 2016 No. 1101 | EN 60730-2-15:2010 | Automatic electrical controls for household and similar use - Part 2-15: Particular requirements for automatic electrical air flow, water flow and water level sensing controls |
| S.I. 2016 No. 1101 | EN 60730-2-19:2002 | Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements |
| S.I. 2016 No. 1101 | EN 60754-1:2014 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
| S.I. 2016 No. 1101 | EN 60754-2:2014 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
| S.I. 2016 No. 1101 | EN 60799:1998 | Electrical accessories - Cord sets and interconnection cord sets |
| S.I. 2016 No. 1101 | EN 60811-100:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General |
| S.I. 2016 No. 1101 | EN 60811-201:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
| S.I. 2016 No. 1101 | EN 60811-202:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
| S.I. 2016 No. 1101 | EN 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
| S.I. 2016 No. 1101 | EN 60811-301:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds |
| S.I. 2016 No. 1101 | EN 60811-302:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds |
| S.I. 2016 No. 1101 | EN 60811-401:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven |
| S.I. 2016 No. 1101 | EN 60811-402:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests |
| S.I. 2016 No. 1101 | EN 60811-403:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds |
| S.I. 2016 No. 1101 | EN 60811-404:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths |
| S.I. 2016 No. 1101 | EN 60811-405:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths |
| S.I. 2016 No. 1101 | EN 60811-406:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds |
| S.I. 2016 No. 1101 | EN 60811-407:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds |
| S.I. 2016 No. 1101 | EN 60811-408:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds |
| S.I. 2016 No. 1101 | EN 60811-409:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths |
| S.I. 2016 No. 1101 | EN 60811-410:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors |
| S.I. 2016 No. 1101 | EN 60811-411:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds |
| S.I. 2016 No. 1101 | EN 60811-412:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb |
| S.I. 2016 No. 1101 | EN 60811-501:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds |
| S.I. 2016 No. 1101 | EN 60811-502:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations |
| S.I. 2016 No. 1101 | EN 60811-503:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths |
| S.I. 2016 No. 1101 | EN 60811-504:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths |
| S.I. 2016 No. 1101 | EN 60811-505:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths |
| S.I. 2016 No. 1101 | EN 60811-506:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths |
| S.I. 2016 No. 1101 | EN 60811-507:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials |
| S.I. 2016 No. 1101 | EN 60811-508:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths |
| S.I. 2016 No. 1101 | EN 60811-509:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test) |
| S.I. 2016 No. 1101 | EN 60811-510:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air |
| S.I. 2016 No. 1101 | EN 60811-511:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds |
| S.I. 2016 No. 1101 | EN 60811-512:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature |
| S.I. 2016 No. 1101 | EN 60811-513:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning |
| S.I. 2016 No. 1101 | EN 60811-601:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds |
| S.I. 2016 No. 1101 | EN 60811-602:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds |
| S.I. 2016 No. 1101 | EN 60811-603:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds |
| S.I. 2016 No. 1101 | EN 60811-604:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds |
| S.I. 2016 No. 1101 | EN 60811-605:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds |
| S.I. 2016 No. 1101 | EN 60811-606:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density |
| S.I. 2016 No. 1101 | EN 60811-607:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene |
| S.I. 2016 No. 1101 | EN 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| S.I. 2016 No. 1101 | EN 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| S.I. 2016 No. 1101 | EN 60825-2:2004 | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| S.I. 2016 No. 1101 | EN 60825-4:2006 | Safety of laser products - Part 4: Laser guards |
| S.I. 2016 No. 1101 | EN 60825-12:2004 | Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information |
| S.I. 2016 No. 1101 | EN 60831-1:2014 | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation |
| S.I. 2016 No. 1101 | EN 60831-2:2014 | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2: Ageing test, self-healing test and destruction test |
| S.I. 2016 No. 1101 | EN 60838-1:2004 | Miscellaneous lampholders - Part 1: General requirements and tests |
| S.I. 2016 No. 1101 | EN 60838-1:2017 | Miscellaneous lampholders - Part 1: General requirements and tests |
| S.I. 2016 No. 1101 | EN 60838-2-1:1996 | Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 |
| S.I. 2016 No. 1101 | EN 60838-2-2:2006 | Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules |
| S.I. 2016 No. 1101 | EN 60898-1:2003 | Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation |
| S.I. 2016 No. 1101 | EN 60898-1:2019 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation |
| S.I. 2016 No. 1101 | EN 60898-2:2006 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation |
| S.I. 2016 No. 1101 | EN 60898-2:2021 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c. and d.c. operation |
| S.I. 2016 No. 1101 | EN 60931-1:1996 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation |
| S.I. 2016 No. 1101 | EN 60931-2:1996 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 2: Ageing test and destruction test |
| S.I. 2016 No. 1101 | EN 60931-3:1996 | Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 3: Internal fuses |
| S.I. 2016 No. 1101 | EN 60934:2001 | Circuit-breakers for equipment (CBE) |
| S.I. 2016 No. 1101 | EN IEC 60934:2019 | Circuit breakers for equipment (CBE) |
| S.I. 2016 No. 1101 | EN 60947-1:2007 | Low-voltage switchgear and controlgear - Part 1: General rules |
| S.I. 2016 No. 1101 | EN 60947-2:2006 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| S.I. 2016 No. 1101 | EN 60947-2:2017 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| S.I. 2016 No. 1101 | EN 60947-2:2017 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| S.I. 2016 No. 1101 | EN 60947-3:2009 | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| S.I. 2016 No. 1101 | EN IEC 60947-3:2021 | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| S.I. 2016 No. 1101 | EN 60947-4-1:2010 | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| S.I. 2016 No. 1101 | EN IEC 60947-4-1:2019 | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| S.I. 2016 No. 1101 | EN 60947-4-2:2012 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| S.I. 2016 No. 1101 | EN 60947-4-3:2014 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| S.I. 2016 No. 1101 | EN 60947-5-1:2004 | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
| S.I. 2016 No. 1101 | EN 60947-5-1:2017 | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
| S.I. 2016 No. 1101 | EN 60947-5-1:2017 | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
| S.I. 2016 No. 1101 | EN 60947-5-2:2007 | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches |
| S.I. 2016 No. 1101 | EN IEC 60947-5-2:2020 | Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches |
| S.I. 2016 No. 1101 | EN 60947-5-3:1999 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF) |
| S.I. 2016 No. 1101 | EN 60947-5-4:2003 | Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests |
| S.I. 2016 No. 1101 | EN 60947-5-4:2003 | Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching elements - Method of assessing the performance of low-energy contacts - Special tests |
| S.I. 2016 No. 1101 | EN 60947-5-5:1997 | Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function |
| S.I. 2016 No. 1101 | EN 60947-5-5:1997 | Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function |
| S.I. 2016 No. 1101 | EN 60947-5-7:2003 | Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output |
| S.I. 2016 No. 1101 | EN 60947-5-8:2006 | Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches |
| S.I. 2016 No. 1101 | EN IEC 60947-5-8:2021 | Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches |
| S.I. 2016 No. 1101 | EN 60947-5-9:2007 | Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches |
| S.I. 2016 No. 1101 | EN 60947-6-1:2005 | Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment |
| S.I. 2016 No. 1101 | EN 60947-6-2:2003 | Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) |
| S.I. 2016 No. 1101 | EN 60947-7-1:2009 | Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
| S.I. 2016 No. 1101 | EN 60947-7-2:2009 | Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors |
| S.I. 2016 No. 1101 | EN 60947-7-3:2009 | Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks |
| S.I. 2016 No. 1101 | EN 60947-8:2003 | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
| S.I. 2016 No. 1101 | EN IEC 60947-8:2023 | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
| S.I. 2016 No. 1101 | EN IEC 60947-9-1:2019 | Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - Arc quenching devices |
| S.I. 2016 No. 1101 | EN 60950-21:2003 | Information technology equipment - Safety - Part 21: Remote power feeding |
| S.I. 2016 No. 1101 | EN 60950-22:2006 | Information technology equipment - Safety - Part 22: Equipment installed outdoors |
| S.I. 2016 No. 1101 | EN 60950-23:2006 | Information technology equipment - Safety - Part 23: Large data storage equipment |
| S.I. 2016 No. 1101 | EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| S.I. 2016 No. 1101 | EN 60974-1:2012 | Arc welding equipment - Part 1: Welding power sources |
| S.I. 2016 No. 1101 | EN IEC 60974-1:2018 | Arc welding equipment - Part 1: Welding power sources |
| S.I. 2016 No. 1101 | EN 60974-2:2013 | Arc welding equipment - Part 2: Liquid cooling systems |
| S.I. 2016 No. 1101 | EN IEC 60974-2:2019 | Arc welding equipment - Part 2: Liquid cooling systems |
| S.I. 2016 No. 1101 | EN 60974-3:2014 | Arc welding equipment - Part 3: Arc striking and stabilizing devices |
| S.I. 2016 No. 1101 | EN IEC 60974-3:2019 | Arc welding equipment - Part 3: Arc striking and stabilizing devices |
| S.I. 2016 No. 1101 | EN 60974-5:2013 | Arc welding equipment - Part 5: Wire feeders |
| S.I. 2016 No. 1101 | EN IEC 60974-5:2019 | Arc welding equipment - Part 5: Wire feeders |
| S.I. 2016 No. 1101 | EN 60974-6:2016 | Arc welding equipment - Part 6: Limited duty equipment |
| S.I. 2016 No. 1101 | EN 60974-7:2013 | Arc welding equipment - Part 7:Torches |
| S.I. 2016 No. 1101 | EN IEC 60974-7:2019 | Arc welding equipment - Part 7: Torches |
| S.I. 2016 No. 1101 | EN 60974-8:2009 | Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems |
| S.I. 2016 No. 1101 | EN IEC 60974-8:2021 | Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems |
| S.I. 2016 No. 1101 | EN 60974-11:2010 | Arc welding equipment - Part 11: Electrode holders |
| S.I. 2016 No. 1101 | EN IEC 60974-11:2021 | Arc welding equipment - Part 11: Electrode holders |
| S.I. 2016 No. 1101 | EN 60974-12:2011 | Arc welding equipment - Part 12: Coupling devices for welding cables |
| S.I. 2016 No. 1101 | EN 60974-13:2011 | Arc welding equipment - Part 13: Welding clamp |
| S.I. 2016 No. 1101 | EN IEC 60974-13:2021 | Arc welding equipment - Part 13: Welding clamp |
| S.I. 2016 No. 1101 | EN 60998-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| S.I. 2016 No. 1101 | EN 60998-2-2:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| S.I. 2016 No. 1101 | EN 60998-2-3:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
| S.I. 2016 No. 1101 | EN 60998-2-4:2005 | Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices |
| S.I. 2016 No. 1101 | EN 60999-1:2000 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included) |
| S.I. 2016 No. 1101 | EN 60999-2:2003 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm² up to 300 mm² (included) |
| S.I. 2016 No. 1101 | EN 61008-1:2012 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
| S.I. 2016 No. 1101 | EN 61008-1:2012 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
| S.I. 2016 No. 1101 | EN 61008-2-1:1994 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 2-1: Applicability of the general rules to RCCB's functionally independent of line voltage |
| S.I. 2016 No. 1101 | EN 61009-1:2012 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules |
| S.I. 2016 No. 1101 | EN 61009-1:2012 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules |
| S.I. 2016 No. 1101 | EN 61009-2-1:1994 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 2-1: Applicability of the general rules to RCBO's functionally independent of line voltage |
| S.I. 2016 No. 1101 | EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61010-2-010:2014 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials |
| S.I. 2016 No. 1101 | EN IEC 61010-2-010:2020 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials |
| S.I. 2016 No. 1101 | EN IEC 61010-2-011:2021 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-011: Particular requirements for refrigerating equipment |
| S.I. 2016 No. 1101 | EN IEC 61010-2-012:2022 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment |
| S.I. 2016 No. 1101 | EN 61010-2-020:2006 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges |
| S.I. 2016 No. 1101 | EN 61010-2-030:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits |
| S.I. 2016 No. 1101 | EN IEC 61010-2-030:2021 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits |
| S.I. 2016 No. 1101 | EN 61010-2-032:2012 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement |
| S.I. 2016 No. 1101 | EN IEC 61010-2-032:2021 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement |
| S.I. 2016 No. 1101 | EN 61010-2-033:2012 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage |
| S.I. 2016 No. 1101 | EN IEC 61010-2-033:2021 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-033: Particular requirements for hand-held multimeters and other meters, for domestic and professional use, capable of measuring mains voltage |
| S.I. 2016 No. 1101 | EN IEC 61010-2-034:2021 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-034: Particular requirements for measurement equipment for insulation resistance and test equipment for electric strength |
| S.I. 2016 No. 1101 | EN 61010-2-040:2005 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| S.I. 2016 No. 1101 | EN IEC 61010-2-040:2021 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| S.I. 2016 No. 1101 | EN 61010-2-051:2015 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring |
| S.I. 2016 No. 1101 | EN IEC 61010-2-051:2021 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring |
| S.I. 2016 No. 1101 | EN 61010-2-061:2015 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
| S.I. 2016 No. 1101 | EN IEC 61010-2-061:2021 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization |
| S.I. 2016 No. 1101 | EN 61010-2-081:2015 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
| S.I. 2016 No. 1101 | EN IEC 61010-2-081:2020 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes |
| S.I. 2016 No. 1101 | EN 61010-2-091:2012 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems |
| S.I. 2016 No. 1101 | EN IEC 61010-2-091:2021 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-091: Particular requirements for cabinet X-ray systems |
| S.I. 2016 No. 1101 | EN IEC 61010-2-130:2021 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-130: Particular requirements for equipment intended to be used in educational establishments by children |
| S.I. 2016 No. 1101 | EN 61010-2-201:2013 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-201: Particular requirements for control equipment |
| S.I. 2016 No. 1101 | EN IEC 61010-2-201:2018 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment |
| S.I. 2016 No. 1101 | EN IEC 61010-2-202:2021 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators |
| S.I. 2016 No. 1101 | EN 61010-031:2015 | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test |
| S.I. 2016 No. 1101 | EN 61028:1993 | Electrical measuring instruments - X-Y recorders |
| S.I. 2016 No. 1101 | EN 61034-1:2005 | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus |
| S.I. 2016 No. 1101 | EN 61034-2:2005 | Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements |
| S.I. 2016 No. 1101 | EN 61048:2006 | Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements |
| S.I. 2016 No. 1101 | EN 61050:1992 | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (generally called neon-transformers) - General and safety requirements |
| S.I. 2016 No. 1101 | EN 61058-1:2002 | Switches for appliances - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN IEC 61058-1:2018 | Switches for appliances - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61058-2-1:2011 | Switches for appliances - Part 2-1: Particular requirements for cord switches |
| S.I. 2016 No. 1101 | EN 61058-2-4:2005 | Switches for appliances - Part 2-4: Particular requirements for independently mounted switches |
| S.I. 2016 No. 1101 | EN 61058-2-5:2011 | Switches for appliances - Part 2-5: Particular requirements for change-over selectors |
| S.I. 2016 No. 1101 | EN 61071:2007 | Capacitors for power electronics |
| S.I. 2016 No. 1101 | EN 61095:2009 | Electromechanical contactors for household and similar purposes |
| S.I. 2016 No. 1101 | EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| S.I. 2016 No. 1101 | EN 61138:2007 | Cables for portable earthing and short-circuiting equipment |
| S.I. 2016 No. 1101 | EN 61140:2002 | Protection against electric shock - Common aspects for installation and equipment |
| S.I. 2016 No. 1101 | EN 61143-1:1994 | Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements |
| S.I. 2016 No. 1101 | EN 61143-2:1994 | Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods |
| S.I. 2016 No. 1101 | EN 61184:2017 | Bayonet lampholders |
| S.I. 2016 No. 1101 | EN 61187:1994 | Electrical and electronic measuring equipment - Documentation |
| S.I. 2016 No. 1101 | EN 61195:1999 | Double-capped fluorescent lamps - Safety specifications |
| S.I. 2016 No. 1101 | EN 61199:2011 | Single-capped fluorescent lamps - Safety specifications |
| S.I. 2016 No. 1101 | EN 61204:1995 | Low-voltage power supply devices, d.c. output - Performance characteristics |
| S.I. 2016 No. 1101 | EN 61204-7:2006 | Low voltage power supplies, d.c. output - Part 7: Safety requirements |
| S.I. 2016 No. 1101 | EN IEC 61204-7:2018 | Low-voltage switch mode power supplies - Part 7: Safety requirements |
| S.I. 2016 No. 1101 | EN 61210:2010 | Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
| S.I. 2016 No. 1101 | EN 61230:2008 | Live working - Portable equipment for earthing or earthing and short-circuiting |
| S.I. 2016 No. 1101 | EN 61242:1997 | Electrical accessories - Cable reels for household and similar purposes |
| S.I. 2016 No. 1101 | EN 61243-3:2014 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| S.I. 2016 No. 1101 | EN 61270-1:1996 | Capacitors for microwave ovens - Part 1: General |
| S.I. 2016 No. 1101 | EN 61293:1994 | Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
| S.I. 2016 No. 1101 | EN IEC 61293:2020 | Marking of electrical equipment with ratings related to electrical supply - Safety requirements |
| S.I. 2016 No. 1101 | EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| S.I. 2016 No. 1101 | EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| S.I. 2016 No. 1101 | EN 61310-3:2008 | Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators |
| S.I. 2016 No. 1101 | EN 61316:1999 | Industrial cable reels |
| S.I. 2016 No. 1101 | EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| S.I. 2016 No. 1101 | EN 61347-2-2:2012 | Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
| S.I. 2016 No. 1101 | EN 61347-2-3:2011 | Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| S.I. 2016 No. 1101 | EN 61347-2-7:2012 | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| S.I. 2016 No. 1101 | EN 61347-2-7:2012 | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) |
| S.I. 2016 No. 1101 | EN 61347-2-7:2012 | Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (selfcontained) |
| S.I. 2016 No. 1101 | EN 61347-2-8:2001 | Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps |
| S.I. 2016 No. 1101 | EN 61347-2-9:2013 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
| S.I. 2016 No. 1101 | EN 61347-2-10:2001 | Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) |
| S.I. 2016 No. 1101 | EN 61347-2-11:2001 | Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires |
| S.I. 2016 No. 1101 | EN 61347-2-11:2001 | Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires |
| S.I. 2016 No. 1101 | EN 61347-2-12:2005 | Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) |
| S.I. 2016 No. 1101 | EN 61347-2-13:2014 | Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules |
| S.I. 2016 No. 1101 | EN IEC 61347-2-14:2018 | Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps |
| S.I. 2016 No. 1101 | EN 61386-1:2008 | Conduit systems for cable management - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61386-1:2008 | Conduit systems for cable management - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61386-21:2004 | Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems |
| S.I. 2016 No. 1101 | EN 61386-22:2004 | Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems |
| S.I. 2016 No. 1101 | EN 61386-23:2004 | Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems |
| S.I. 2016 No. 1101 | EN 61386-24:2010 | Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground |
| S.I. 2016 No. 1101 | EN 61386-25:2011 | Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices |
| S.I. 2016 No. 1101 | EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| S.I. 2016 No. 1101 | EN 61439-2:2011 | Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlgear assemblies |
| S.I. 2016 No. 1101 | EN 61439-3:2012 | Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) |
| S.I. 2016 No. 1101 | EN 61439-3:2012 | Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO) |
| S.I. 2016 No. 1101 | EN 61439-4:2013 | Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) |
| S.I. 2016 No. 1101 | EN 61439-5:2015 | Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks |
| S.I. 2016 No. 1101 | EN 61439-6:2012 | Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (busways) |
| S.I. 2016 No. 1101 | EN 61534-1:2011 | Powertrack systems - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61534-1:2011 | Powertrack systems - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61534-21:2014 | Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting |
| S.I. 2016 No. 1101 | EN 61534-21:2014 | Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting |
| S.I. 2016 No. 1101 | EN 61534-22:2014 | Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation |
| S.I. 2016 No. 1101 | EN 61534-22:2014 | Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation |
| S.I. 2016 No. 1101 | EN 61535:2009 | Installation couplers intended for permanent connection in fixed installations |
| S.I. 2016 No. 1101 | EN IEC 61535:2019 | Installation couplers intended for permanent connection in fixed installations |
| S.I. 2016 No. 1101 | EN 61537:2007 | Cable management - Cable tray systems and cable ladder systems |
| S.I. 2016 No. 1101 | EN 61549:2003 | Miscellaneous lamps |
| S.I. 2016 No. 1101 | EN 61557-1:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61557-2:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
| S.I. 2016 No. 1101 | EN 61557-3:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance |
| S.I. 2016 No. 1101 | EN 61557-4:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding |
| S.I. 2016 No. 1101 | EN 61557-5:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth |
| S.I. 2016 No. 1101 | EN 61557-6:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems |
| S.I. 2016 No. 1101 | EN 61557-7:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence |
| S.I. 2016 No. 1101 | EN 61557-8:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
| S.I. 2016 No. 1101 | EN 61557-9:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems |
| S.I. 2016 No. 1101 | EN 61557-9:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems |
| S.I. 2016 No. 1101 | EN 61557-10:2013 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring or monitoring of protective measures |
| S.I. 2016 No. 1101 | EN 61557-11:2009 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems |
| S.I. 2016 No. 1101 | EN 61557-12:2008 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD) |
| S.I. 2016 No. 1101 | EN IEC 61557-12:2022 | Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) |
| S.I. 2016 No. 1101 | EN 61557-13:2011 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 13: Hand-held and hand-manipulated current clamps and sensors for measurement of leakage currents in electrical distribution systems |
| S.I. 2016 No. 1101 | EN 61557-14:2013 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery |
| S.I. 2016 No. 1101 | EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
| S.I. 2016 No. 1101 | EN 61557-16:2015 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 16: Equipment for testing the effectiveness of the protective measures of electrical equipment and/or medical electrical equipment |
| S.I. 2016 No. 1101 | EN 61558-1:2005 | Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests |
| S.I. 2016 No. 1101 | EN IEC 61558-1:2019 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| S.I. 2016 No. 1101 | EN 61558-2-1:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications |
| S.I. 2016 No. 1101 | EN 61558-2-2:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Particular requirements and tests for control transformers and power supplies incorporating control transformers |
| S.I. 2016 No. 1101 | EN 61558-2-3:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners |
| S.I. 2016 No. 1101 | EN 61558-2-4:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers |
| S.I. 2016 No. 1101 | EN 61558-2-5:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units |
| S.I. 2016 No. 1101 | EN 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| S.I. 2016 No. 1101 | EN 61558-2-7:2007 | Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Particular requirements and tests for transformers and power supplies for toys |
| S.I. 2016 No. 1101 | EN 61558-2-8:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
| S.I. 2016 No. 1101 | EN 61558-2-9:2011 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
| S.I. 2016 No. 1101 | EN 61558-2-12:2011 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
| S.I. 2016 No. 1101 | EN 61558-2-13:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers |
| S.I. 2016 No. 1101 | EN 61558-2-14:2013 | Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers |
| S.I. 2016 No. 1101 | EN 61558-2-15:2012 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for the supply of medical locations |
| S.I. 2016 No. 1101 | EN 61558-2-16:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units |
| S.I. 2016 No. 1101 | EN 61558-2-20:2011 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors |
| S.I. 2016 No. 1101 | EN 61558-2-23:2010 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites |
| S.I. 2016 No. 1101 | EN 61558-2-26:2013 | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26: Particular requirements and tests for transformers and power supply units for saving energy and other purposes |
| S.I. 2016 No. 1101 | EN 61643-11:2012 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| S.I. 2016 No. 1101 | EN 61643-11:2012 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| S.I. 2016 No. 1101 | EN 61643-21:2001 | Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods |
| S.I. 2016 No. 1101 | EN 61643-31:2019 | Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations |
| S.I. 2016 No. 1101 | EN 61730-1:2007 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| S.I. 2016 No. 1101 | EN IEC 61730-1:2018 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| S.I. 2016 No. 1101 | EN 61730-2:2007 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| S.I. 2016 No. 1101 | EN IEC 61730-2:2018 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| S.I. 2016 No. 1101 | EN 61770:2009 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets |
| S.I. 2016 No. 1101 | EN 61800-5-1:2007 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy |
| S.I. 2016 No. 1101 | EN 61800-5-1:2007 | Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy |
| S.I. 2016 No. 1101 | EN 61812-1:2011 | Time relays for industrial and residential use - Part 1: Requirements and tests |
| S.I. 2016 No. 1101 | EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN IEC 61851-1:2019 | Electric vehicle conductive charging system - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN IEC 61851-1:2019 | Electric vehicle conductive charging system - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
| S.I. 2016 No. 1101 | EN 61851-22:2002 | Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station |
| S.I. 2016 No. 1101 | EN 61851-23:2014 | Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station |
| S.I. 2016 No. 1101 | EN 61851-24:2014 | Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging |
| S.I. 2016 No. 1101 | EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61869-2:2012 | Instrument transformers - Part 2: Additional requirements for current transformers |
| S.I. 2016 No. 1101 | EN 61869-3:2011 | Instrument transformers - Part 3: Additional requirements for inductive voltage transformers |
| S.I. 2016 No. 1101 | EN 61869-4:2014 | Instrument transformers - Part 4: Additional requirements for combined transformers |
| S.I. 2016 No. 1101 | EN 61869-5:2011 | Instrument transformers - Part 5: Additional requirements for capacitor voltage transformers |
| S.I. 2016 No. 1101 | EN 61914:2016 | Cable cleats for electrical installations |
| S.I. 2016 No. 1101 | EN IEC 61914:2021 | Cable cleats for electrical installations |
| S.I. 2016 No. 1101 | EN 61921:2003 | Power capacitors - Low-voltage power factor correction banks |
| S.I. 2016 No. 1101 | EN 61995-1:2008 | Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61995-1:2008 | Devices for the connection of luminaires for household and similar purposes - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 61995-2:2009 | Devices for the connection of luminaires for household and similar purposes - Part 2: Standard sheets for DCL |
| S.I. 2016 No. 1101 | EN 62020:1998 | Electrical accessories - Residual current monitors for household and similar uses (RCMs) |
| S.I. 2016 No. 1101 | EN 62026-1:2007 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules |
| S.I. 2016 No. 1101 | EN 62026-2:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) |
| S.I. 2016 No. 1101 | EN 62026-3:2015 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| S.I. 2016 No. 1101 | EN 62026-3:2015 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet |
| S.I. 2016 No. 1101 | EN 62026-7:2013 | Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet |
| S.I. 2016 No. 1101 | EN 62031:2008 | LED modules for general lighting - Safety specifications |
| S.I. 2016 No. 1101 | EN IEC 62031:2020 | LED modules for general lighting - Safety specifications |
| S.I. 2016 No. 1101 | EN 62035:2014 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| S.I. 2016 No. 1101 | EN 62035:2014 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| S.I. 2016 No. 1101 | EN 62040-1:2008 | Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS |
| S.I. 2016 No. 1101 | EN IEC 62040-1:2019 | Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS |
| S.I. 2016 No. 1101 | EN 62080:2009 | Sound signalling devices for household and similar purposes |
| S.I. 2016 No. 1101 | EN 62094-1:2003 | Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 62109-1:2010 | Safety of power converters for use in photovoltaic power systems - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 62109-2:2011 | Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters |
| S.I. 2016 No. 1101 | EN 62135-1:2015 | Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation |
| S.I. 2016 No. 1101 | EN 62135-1:2015 | Resistance welding equipment - Part 1: Safety requirements for design, manufacture and installation |
| S.I. 2016 No. 1101 | EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
| S.I. 2016 No. 1101 | EN 62196-2:2012 | Plugs, socket-outlets, vehicle connectors and vehicle inlets — Conductive charging of electric vehicles — Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
| S.I. 2016 No. 1101 | EN 62196-3:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers |
| S.I. 2016 No. 1101 | EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| S.I. 2016 No. 1101 | EN 62233:2008 | Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure |
| S.I. 2016 No. 1101 | EN 62253:2011 | Photovoltaic pumping systems - Design qualification and performance measurements |
| S.I. 2016 No. 1101 | EN 62275:2015 | Cable management systems - Cable ties for electrical installations |
| S.I. 2016 No. 1101 | EN IEC 62275:2019 | Cable management systems - Cable ties for electrical installations |
| S.I. 2016 No. 1101 | EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| S.I. 2016 No. 1101 | EN 62282-3-300:2012 | Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation |
| S.I. 2016 No. 1101 | EN 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| S.I. 2016 No. 1101 | EN 62310-1:2005 | Static transfer systems (STS) - Part 1: General and safety requirements |
| S.I. 2016 No. 1101 | EN 62311:2008 | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
| S.I. 2016 No. 1101 | EN 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified) |
| S.I. 2016 No. 1101 | EN 62395-1:2013 | Electrical resistance trace heating systems for industrial and commercial applications - Part 1: General and testing requirements |
| S.I. 2016 No. 1101 | EN 62423:2012 | Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses |
| S.I. 2016 No. 1101 | EN 62423:2012 | Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses |
| S.I. 2016 No. 1101 | EN 62423:2012 | Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses |
| S.I. 2016 No. 1101 | EN 62444:2013 | Cable glands for electrical installations |
| S.I. 2016 No. 1101 | EN 62471:2008 | Photobiological safety of lamps and lamp systems |
| S.I. 2016 No. 1101 | EN 62477-1:2012 | Safety requirements for power electronic converter systems and equipment - Part 1: General |
| S.I. 2016 No. 1101 | EN 62477-1:2012 | Safety requirements for power electronic converter systems and equipment - Part 1: General |
| S.I. 2016 No. 1101 | EN 62479:2010 | Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
| S.I. 2016 No. 1101 | EN 62493:2010 | Assessment of lighting equipment related to human exposure to electromagnetic fields |
| S.I. 2016 No. 1101 | EN 62532:2011 | Fluorescent induction lamps - Safety specifications |
| S.I. 2016 No. 1101 | EN 62549:2011 | Articulated systems and flexible systems for cable guiding |
| S.I. 2016 No. 1101 | EN 62560:2012 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications |
| S.I. 2016 No. 1101 | EN 62560:2012 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications |
| S.I. 2016 No. 1101 | EN 62606:2013 | General requirements for arc fault detection devices |
| S.I. 2016 No. 1101 | EN 62606:2013 | General requirements for arc fault detection devices |
| S.I. 2016 No. 1101 | EN 62626-1:2014 | Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-disconnectors outside the scope of IEC 60947-3 to provide isolation during repair and maintenance work |
| S.I. 2016 No. 1101 | HD 62640:2015 | Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses |
| S.I. 2016 No. 1101 | EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications |
| S.I. 2016 No. 1101 | EN 62868:2015 | Organic light emitting diode (OLED) panels for general lighting - Safety requirements |
| S.I. 2016 No. 1101 | EN 62949:2017 | Particular safety requirements for equipment to be connected to information and communication networks |
| S.I. 2016 No. 1101 | EN 63024:2018 | Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs for household and similar uses |
| S.I. 2016 No. 1101 | EN IEC 63044-3:2018 | Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements |